Coleman booster motor with 120V centrifugal switch. Centrifugal switch cannot be sold separately. 115V, 3000 RP, 1/150hp. This new upgraded Fasco D408 motor does not require oiling. Shaft size is 1/4" but comes with a sleeve to adapt it to 5/16". Typically used with booster wheel BW16040 or BW16042.
Holes are tapped around the shaft to accept rubber mounts part # 8665B1281. If these rubber mounts are used, the two threaded rods shown in the picture would be removed by simply twisting out.
Replaces 7995-316, 7700B314, 7700B3149, 7724-316, 7724-3169, 7700A314, 7700A3149, 7700-314, 7700-3149, 7990-316, 8865-314, 8865-3149, 8865-3141, 7121-5906 and Fasco 712110067 & D408.
If you are searching for a similar motor with a 5/16" diameter shaft, then check out part number D1192.